Select Page

Description

Diamond Products-Core Cut CC2520H-26 Walk Behind Self Propelled Saw is a saw truly made for the pro!

Diamond Products CoreCut CC2520H-26 & CC2522H-26 Specs (click for pdf)

Made in USA logo - smaller

Features & Benefits:

  • Rigid high strength 3/16” steel box frame with heavy bar reinforcement
  • 2 position tilt handle bars
  • Push or self propelled drive
  • Screw feed raise and lower with optional power raise and lower
  • Cyclone air filter on gas models
  • Positive gear drive to rear axle via Eaton hydrostatic transmission
  • Specs show optional Electric Raise & Lower Blade

Specifications:

Maximum depth of cut with 14” blade:4-5/8”
Maximum depth of cut with 20” blade:7-3/8”
Maximum depth of cut with 26” blade:10-3/8”
Blade shaft RPM:Varies
Blade shaft diameter:1-1/2”
Arbor size:1” w/drive pin
Blade shaft drive:4 belt up to 20.8HP, 5 belt for 25HP
Blade mounting:Right or Left
Transmission (self propelled only):Eaton Model 6
Drive Speed:0-130 feet/min
Fuel Capacity (gas models):5 gallons

 

BLADE CAPACITYMOTOR/ENGINE POWERELECTRIC STARTPOWER SOURCEENGINE/MOTOR MAKE/MODELREMOTE CYCLONE AIR CLEANERRIGHT OR LEFT HANDPART NUMBERCATALOG NUMBER
14″15 HP, 230V-3PHN/AElectricLeeson®NoN/A5800400A48413
14”15 HP, 460V-3PHN/AElectricLeeson®NoN/A5800400B99980
20″15 HP, 230V-3PHN/AElectricLeeson®NoN/A5800401A98001
20″15 HP, 460V-3PHN/AElectricLeeson®NoN/A5800401B93694
26”15 HP, 230V-3PHN/AElectricLeeson®NoN/A5800402A94379
26”15 HP, 460V-3PHN/AElectricLeeson®NoN/A5800402B94409
14″20.8 HP, 35.6 torque (lbs.-ft.)YesGasHonda® GX630YesN/A580040648418
20″20.8 HP, 35.6 torque (lbs.-ft.)YesGasHonda® GX630YesN/A580040747164
26”22.1 HP, 35.6 Torque (lbs.-ft.)YesGasHonda® GX630YesN/A580040848419
14”22.1 HP, 35.6 Torque (lbs.-ft.)YesGasHonda® GX690YesN/A580152029637
20″22.1 HP, 35.6 Torque (lbs.-ft.)YesGasHonda® GX690YesN/A580152129638
26”22.1 HP, 35.6 Torque (lbs.-ft.)YesGasHonda® GX690YesN/A580152234013
14″25 HP-25 GPM @ 2000 PSIYesHydraulicWebster®NoN/A580048948426
20″25 HP-25 GPM @ 2000 PSIYesHydraulicWebster®NoN/A580049048427
26”25 HP-25 GPM @ 2000 PSIYesHydraulicWebster®NoN/A580049148428
14″25 HP, 41.2 Torque (lbs.-ft.)YesGasKohler® Command CH742YesN/A580059779036
20″25 HP, 41.2 Torque (lbs.-ft.)YesGasKohler® Command CH742YesN/A580059879037
26”25 HP, 41.2 Torque (lbs.-ft.)YesGasKohler® Command CH742YesRight Hand580059978816

The highlighted line is this specific saw!

Photos