Description
The EDCO TL-9 Value Direct Drive 9″ Grinder #58900 (also called the DDG-9) is an excellent performing 110vt performer at only 81 lbs, but keep in mind this is a lighter duty unit.
Feel free to contact us for shipping options to a Residential Business, lift gate service, etc. Please contact for cutter/grinder options.
The Optional DYMA-SLIDER Kit we keep is the popular A152 Kit (pics below) this includes a 3 pc set of each of the following for a value at $787 when ordered with the TL9 (below prices are the each price if ordered separately and the above options include these prices x 3 for the set:
- QC-PCD1L $106 if purchased separate from kit (removal of heavy hard coatings. leaves a rough surface)
- QC2S-MC-0018 $60 if purchased separate from kit (Segments in 18 Grit for removal of coating & concrete. leaves a smooth surface with medium scratches)
- QCAR-MC-0030 $86 if purchased separate from kit (Arrows in 30 Grit for removal of mastic & glue. leaves a smooth surface with medium scratches)
- QC2B-MC-0030 $65 if purchased separate from kit (2 Dots in 30 Grit for removal for general grinding. leaves a smooth surface with small scratches)
- Hammer, Square Pin & Case
Feel free to contact with the many other EDCO options.
EDCO TL-9 Brochure (click for pdf)
- Resurfaces hundreds of sq ft per hour
- Performs some Edge Grinding tasks
- Compatible with EDCO Vortex 200 Vacuum for dust-free working
- At only 81lbs it fits inside car trunks when the handlebar is collapsed
- Accepts EDCO Magna-Trap™ Slide-On Tooling
- No parts to service and no belts to replace.
- While there are no belts as mentioned above as a “positive” since this unit is a direct drive, that can also be a negative…this unit will have its limitations and also worth considering is there is no motor protection on this unit.
| TL-9 | ||
|---|---|---|
| Part# 58900 | Power Electric | Horse Power 1.5HP, 115V |
| Phase Single | AMPS 15 | *RPM 1690 |
| Length 41″ | Width 16.5″ | Height 41″ |
| Weight 81lbs | Belts N/A | |
